Description

Video

• Fields of application

  Universal use in decorative interior design for surfaces that are to obtain a natural surface treatment, are exposed to normal to medium use and have direct contact with food. Above all for kitchen work surfaces, chopping and breakfast boards, fruit bowls and other food storage containers made of wood as well as toys and the like.

  Technical specifications

  Giscode	Ö10+
  Yield per coat	46 – 184 m²/l Die Ergiebigkeit ist stark abhängig von der Applikationsart. Bei Spritzaufträgen verringert sich die angegebene theoretische Ergiebigkeit um bis zu 40 %. Streich- oder Handauftragsverfahren sind nahezu verlustfrei. Die Angaben beziehen sich auf ein Liter des verarbeitungsfähigen Produktes, wenn nötig inklusive Härter und Verdünnung.
  Appearance	colourless
  Density series kg/l	0.92
  Flow time	30 s / DIN 53211 – 4 mm
  Form of delivery	fluid
  Non-volatile content series %	100
  VOC EU %	0 %
  Number of coats (max)	2
  Amount per layer (minimum)	5 g/m²
  Amount per layer (max)	20 g/m²
  Total application volume	20 g/m²

  Information on use

  Drying	16 h / 20 °C
  Stackable after	Immediately after regular application the oil and wiping-off the surplus.
  Complete drying	7 d / 20 °C
  Surface preparation	For the initial treatment of woods, correctly, sand and remove dust from the dry wood.
  Substrate sanding grits from-to	120 – 320
  Finishing	Ability to top coat: possible with another coat of the same product or with suitable colourless materials; see section “Special information”.
  Comments on sanding	The raw-wood sanding must be adapted to the required application quantity; the lower the application quantity, the finer the sanding grit (up to grit 240 when buffing). Ensure that the edge sanding and surface sanding are even. The sanding quality is crucial in ensuring a good quality of the final coat!
  Working temperature	20 °C
  Processing instructions	Rub it in using a fine sanding fleece, allow absorption for 5 – 10 min and then remove the excess using a cotton cloth. Impregnated cotton clothes can be washed at 60 °C after use using regular household detergents.
  Particular instructions	The oiled surface must be stored for at least 1 week at 20 °C and with adequate air circulation prior to contact with food and animal feed.
  General instructions on workmanship	Materials with oxidative drying: a skin can form on the surface in containers, mainly opened containers. This should be removed prior to use. Low temperatures, increased ambient humidity, inadequate air exchange and wood contents that inhibit drying can extend the oil’s drying time.<br/> The risk of spontaneous combustion means that coating substances generating heat during drying (oxidative drying oils) and coating substances forming highly flammable deposits may not be applied in the same spray booth without further precautions (see BGR 500, section 3: Handling different coating substances). Cotton cloths, cardboard and paper saturated with oil pose a risk of spontaneous combustion due to heat accumulation. They should therefore be spread out in the air to dry before being disposed of. Even oil-saturated wood dust is prone to spontaneous combustion; as a precaution please do not dispose of it in sealed containers and, where possible, do not use the spray booth for sanding. The oil itself does not combust spontaneously.<br/> The necessary cleaning, care and refresh intervals should be matched to the number of layers of oil applied and the nature and intensity of use. The material properties have been tested on commonly available woods, such as oak, beech, etc. Resins in softwoods, coloured woods and exotic or unusual wood species can result in delayed drying and optical impairments. Please therefore check for suitability prior to use on such woods. Please also note that oils, like almost all natural materials, change colour over time under the influence of light and heat. Their colour can alter both under the influence of light (e.g. the sun’s UV rays, etc.) and due to light deprivation (yellowing at absence of light, e.g. beneath tablecloths, carpets, cabinets, etc.). This can become particularly apparent on brightly pigmented substrates. Oiled surfaces have a distinctive odour. This diminishes in a matter of days with progressive drying.

• Sample process

• Fruit bowl, olive wood sanded according to instructions with dust removal.
  Apply 1 x circa 10 – 20 g/² FOODCARE-OIL GE 11077 using a fine sanding fleece and rub it in.
  Remove the excess with a cotton cloth after absorption for 5 – 10 min at 20 °C room temperature.
  The surface should appear dry; otherwise there may be issues with thorough drying.
  A second coat of oil can be applied after 16 h at 20 °C room temperature, or the piece can be packaged.
  The oiled surface must be stored for at least 1 week at 20 °C and with adequate air circulation prior to contact with food and animal feed.

Safety Data Sheets / Certificates

•  Lebensmittelkontakt_nach_(LFGB)_und_Verordnung_(EG)_Nr. 19352004_GE_11077_de + en_pale

Material Safety Data Sheets

• GE_11077_EN_GB_GSM-R556594